Yongda Transit Mixers
WHY WE ARE THE BEST
Yongda Transit Mixers For Quality Concrete Mixing
Our Unique 3 Way Mixing Actions:
（A）Spiral pitch forces material towards dished end top layers flow in the opposite direction.
When the tank rotates in the mixing direction, the precise spiral blades move the concrete towards the end cap while also rolling the concrete towards the front cone. This creates a mixing action where the concrete flows from the front of the drum to the back and then back to the front.
（B）Blade shape causes local mixing as mate is pushed towards the end.
When the drum rotates in the mixing direction, the force of the blades acting on the concrete pushes it towards the end cap. Under the influence of this force and the resulting reaction force, the concrete exerts pressure on the blades, causing it to move along the streamlined cross-section of the blades. Guided by the blade edges, mixing occurs in front of the blades, and with the continuous rotation of the drum, the concrete is continuously mixed in a spiral motion.
（C）Precise positioning of blades in bottom cone lifts creates rotational mixing.
The tail-end blades are moulded into a special structure, which, when the drum rotates in the mixing direction, drives the concrete to undergo circumferential mixing.
Major Types For Sale:
Small Transit Mixer: 2.5-4m³
Middle Transit Mixer: 5-8m³
Large Transit Mixer: 9-12m³
Semi-Trailer Transit Mixer: 12-14m³
Special Purpose Transit Mixer: Tailor-made
Yongda Transit Mixers For Sale
The Yongda transit mixer is engineered for dry mixing (Dry Mixer) technology, yet it excels even more in wet mixing (Wet Mixer) applications. It achieves a zero slump and effectively mixes both dry and wet aggregates with particle sizes up to 75mm, ensuring high homogeneity and superior workability.
The drum features a small tilt angle and a low center of gravity, enhancing stability. Its compact geometric volume facilitates a high fill rate and increased loading capacity while maintaining a lightweight design. Rapid loading and unloading capabilities result in an almost zero residual rate.
Additionally, the mixer includes a secondary mixing function for concrete repairs. The drum is designed with a lap joint structure for partial replacements, reducing maintenance costs and prolonging service life. The chassis is specifically optimized to fit the frame configurations of various main machine manufacturers, ensuring elastic connections throughout and minimizing the risk of auxiliary beam breakage.
Features of Yongda Transit MIxers
The “curved blade” with a three-dimensional mixing function ensures high uniformity and workability of the concrete, allowing for dry mixing of concrete.
Fast loading and unloading, with minimal concrete residue—almost zero.
The drum has a small tilt angle and a low center of gravity, which enhances driving safety.
The drum features a lap joint structure design, and the blades are reinforced with wear-resistant mesh, significantly extending the tank’s lifespan.
Equipped with high-quality hydraulic systems and reducers to ensure stable operation and a long service life.
Utilizes a pneumatic water supply system that fully considers customer usage habits, offering multiple methods and modes for adding water.
Thorough research on customer operating conditions ensures the chassis meets road requirements, preventing auxiliary beam fractures.
Thoughtful design prioritizes user-friendliness, ensuring safe operation and ease of use.
Specification
The mixing capacity of our concrete mixing truck relies on the capacity of the mixer tank, here are three types of mixer tank capacity that you can choose based on your project’s demands, we also offer customized solutions.
Specification of 2.5m³-4m³ Transit Mixer
| Dimension | 2.5m³ | 3m³ | 4m³ | |||||
| Total Barrel Volume | 4.98m³ | 5.87m³ | 6.45m³ | |||||
| Mixing Capacity | 2.5m³ | 3m³ | 4m³ | |||||
| Height to Feed Chute （A) | 2100mm | 2100mm | 2235mm | |||||
| Height Overall (B) | 2100mm | 2100mm | 2235mm | |||||
| Nominal Length on Truk Chassis (C) | 3800mm | 3800mm | 3800mm | |||||
| Nominal Length Overall (C) | 4628mm | 4628mm | 4628mm | |||||
| Centre of Gravity – estimated (E) | 1490mm | 1695mm | 1704mm | |||||
| Height to Centre of Gravity(Approx) (E) | 888mm | 853mm | 965mm | |||||
| Installation Angle（G） | 15° | 15° | 15° | |||||
| Hydraulic System | Open System | Domestic Brand | ||||||
| Note: Although open systems are cheap, they are unstable during operation; And due to the high output speed, the tank speed is too high, seriously threatening driving safety; Therefore, it is not recommended to adopt it. | ||||||||
| Closed System | Domestic Brand | SUNNY, WEIFUJJ | ||||||
| International Brand | PMP, Rexroth, Danfoss, EATON | |||||||
| Heat Sink Model | 18/26L | |||||||
| Blade Structure | Straight Blade | Curved Blade | Straight Blade | Curved Blade | Straight Blade | Curved Blade | ||
| Adapt to the form of mixing plant equipment | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | ||
| The pressed blade drum is more effective than the straight blade tank when used for transporting wet mixed concrete. | ||||||||
| Packing plan | 40’HQ | 3 Sets | ||||||
| We can customize the design according to customer requirements | ||||||||
| Barrel Specification: Dished End: 6mm Q355B Back Cone: 3.0mm Q355B Nose Cone: 3.0mm Q355B Mix Blades: 3.0mm Q355B Width: Width over Mudguards: 2300mm Outside Chassis Width: 700mm Standard Chassis Rails: 100*80*5RHS Gearbox Brand – Domestic Brand: Tangshan Gear, Wuxi WEIFU, Rong Jiao Gearbox Brand – Domestic Brand: PMP, ZF, BONFIGLIOLI | ||||||||
Specification of 5m³-8m³ Transit Mixer
| Dimension | 5m³ | 6m³ | 7m³ | 8m³ | ||||||
| Total Barrel Volume | 9.94m³ | 10.53m³ | 12.29m³ | 13.47m³ | ||||||
| Mixing Capacity | 5m³ | 6m³ | 7m³ | 8m³ | ||||||
| Height to Feed Chute | (A) | 2341mm | 2408mm | 2501mm | 2571mm | |||||
| Height Overall | (B) | 2421mm | 2481mm | 2581mm | 2651mm | |||||
| Nominal Length on Truk Chassis | (C) | 4500mm | 4500mm | 5100mm | 5100mm | |||||
| Nominal Length Overall | (D) | 5495mm | 5483mm | 6023mm | 6087mm | |||||
| Centre of Gravity – estimated | (E) | 1806mm | 1903mm | 2227mm | 2339mm | |||||
| Height to Centre of Gravity(Approx) | (F) | 918mm | 962mm | 1026mm | 1071mm | |||||
| Installation Angle | （G） | 13.5° | 14° | 13.5° | 13.5° | |||||
| Hydraulic System | Open System | Domestic Brand | / | |||||||
| Note: Although open systems are cheap, they are unstable during operation; And due to the high output speed, the tank speed is too high, seriously threatening driving safety; Therefore, it is not recommended to adopt it. | / | |||||||||
| Closed System | Domestic Brand | SUNNY, WEIFUJJ | ||||||||
| International Brand | PMP, Rexroth, Danfoss, EATON | |||||||||
| Heat Sink Model | 18/26L | |||||||||
| Blade Structure | Straight Blade | Curved Blade | Straight Blade | Curved Blade | Straight Blade | Curved Blade | Straight Blade | Curved Blade | ||
| Adapt to the form of mixing plant equipment | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | ||
| The pressed blade drum is more effective than the straight blade tank when used for transporting wet mixed concrete. | ||||||||||
| Packing plan | 40’HQ | 2 Sets | 2 Sets | 2 Sets | 2 Sets | |||||
| We can customize the design according to customer requirements | ||||||||||
| Barrel Specification: Dished End: 6mm Q355B Back Cone: 3.75mm Q355B Nose Cone: 3.75mm Q355B Mix Blades: 3.75mm Q355B Width: Width over Mudguards: 2450mm Outside Chassis Width: 860mm Standard Chassis Rails: 100*80*5RHS (5m³-6m³) Gearbox Brand – Domestic Brand: Tangshan Gear, Wuxi WEIFU, Rong Jiao Gearbox Brand – Domestic Brand: PMP, ZF, BONFIGLIOLI | ||||||||||
Specification of 9m³-12m³ Transit Mixer
| Dimension | 9m³ | 10m³ | 12m³ | |||||
| Total Barrel Volume | 14.03m³ | 15.28m³ | 17.49m³ | |||||
| Mixing Capacity | 9m³ | 10m³ | 12m³ | |||||
| Height to Feed Chute | (A) | 2620mm | 2690mm | 2830mm | ||||
| Height Overall | (B) | 2696mm | 2766mm | 2906mm | ||||
| Nominal Length on Truk Chassis | (C) | 5400mm | 5700mm | 6300mm | ||||
| Nominal Length Overall | (D) | 6181mm | 6473mm | 7056mm | ||||
| Centre of Gravity – estimated | (E) | 2603mm | 2785mm | 3162mm | ||||
| Height to Centre of Gravity(Approx） | (F) | 1095mm | 1139mm | 1227mm | ||||
| Installation Angle | （G） | 13.5° | 13.5° | 13.5° | ||||
| Hydraulic System | Closed System | Domestic Brand | SUNNY, WEIFUJJ | |||||
| International Brand | PMP, Rexroth, Danfoss, EATON | |||||||
| Heat Sink Model | 18/26L | |||||||
| Blade Structure | Straight Blade | Curved Blade | Straight Blade | Curved Blade | Straight Blade | Curved Blade | ||
| Adapt to the form of mixing plant equipment | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | WET MIX | WET MIX, DRY MIX | ||
| The pressed blade drum is more effective than the straight blade tank when used for transporting wet mixed concrete. | ||||||||
| Packing plan | 40’HQ | 2 Sets | 1 Sets | 1 Sets | ||||
| We can customize the design according to customer requirements | ||||||||
| Barrel Specification: Dished End: 6mm Q355B Back Cone: 4.75mm Q355B or 3.5mm NM300TP Nose Cone: 4.75mm Q355B or 3.5mm NM300TP Mix Blades: 3.75mm Q355B Width: Width over Mudguards: 2450mm Outside Chassis Width: 860mm Standard Chassis Rails: 120*80*6RHS Gearbox Brand – Domestic Brand: Tangshan Gear, Wuxi WEIFU, Rong Jiao Gearbox Brand – Domestic Brand: PMP, ZF, BONFIGLIOLI | ||||||||
MANUFACTURING DETAILS
Why Our Products Lead The Way
Control System
Adopting three-point control, the driver’s cab and both sides of the tail are linked to achieve control of the mixing drum. The control is flexible and convenient, and labels with clear instructions are installed.
Hydraulic System
The hydraulic systems are supplied by domestic and international brands. Matching and efficiency on system stability for long service life. It is our practice to pursue excellent performance and meet different users’ needs to the greatest possible.
Water Supply System
According to the applicable working conditions, there are 300L or 450L water tanks that meet water requirements for mixing and drum cleaning. We used a thick water pipeline equipped with multiple water supply methods to maximize convenience for users with different habits. Set up pipelines for flushing the outer and inner sides of the tank, as well as the blades, and even configure water channels for users to wash their hands, fully considering their various usage requirements.
Humanity Design
The rear of the mixer is equipped with high-power working tail lights, not only meets the requirements of night-time construction but also ensures the safety of personnel and vehicles. The steps at all levels are stamped with thick patterned steel plates, which are anti slip, wear-resistant, and aesthetically pleasing.
unique Blade
The blades pressed into a streamlined curved surface achieve a unique“three-dimensional mixing “function, fully ensuring the uniformity and workability of the concrete, rapid feeding and discharging, and avoiding residual compaction of the concrete, achieving almost zero residual rates.
BLade Protection
The upper side of the blade is welded with wear-resistant diamond mesh, which is filled with initial concrete into the grid, naturally forming an isolation layer between the upper side of the blade and the concrete, avoiding concrete wear on the upper side of the blade during use.
LAP Joints
The drum components are jiggled for lap joints. The various sections of the drum, blades to the drum, and between blades, all adopt a lap joint structure. Effectively avoiding the risk of fractures or weld failures at the connection points. The design is also conducive to localized maintenance and replacement.
Anti Fracture Structure
The diagonal brace adopts a bolted assembly or overall welded structure, and an anti-fracture structure is added at the junction with the auxiliary longitudinal beam, resulting in a longer service life.
CASE STUDIES
cHECKOUT RESULTS ACHIEVED IN OUR COMPLETED CASES
Vietnam
TRaNSIT MIXER DELIVERED TO Vietnam
Thailand
TraNSIT MIXER Truck Sent TO Thailand
Indonesia
TraNSIT MIXER Sent TO Indonesia
Malaysia
concrete mixer truck in Malaysia
China, HongKong
TRANSIT MIXER Sent TO China HongKong
Mexico
TRANSIT MIXER DELIVERED TO MEXICO
Martinique
TRANSIT MIXERS Shipped to Martinique
Jamaica
TRANSIT MIXER Machine in Jamaica
Senegal
TRANSIT MIXER DELIVERED TO Senegal
ADVANCED EQUIPMENT MANUFACTURING
The Complete Work Flow In Our Factory
From initial material selection to final assembly and rigorous testing, each step is designed to optimize efficiency and maintain stringent quality standards.
STEP
01
Cutting And Forming
The drum and components are formed with large CNC plasma cutting machines, and CNC punching machines, which come with high accuracy, small errors and less thermal deformation, ensuring design accuracy and greatly improving production efficiency. The blades, feed hopper, discharge chute, extension chute, guide chute, etc. are pressed and formed using a CNC press to ensure accuracy and consistency. The streamlined design is aesthetically pleasing and greatly reduces concrete adhesion!
STEP
02
Welding
All cones of the mixer drum are welded by a splicing machine before rolling, with one side welded and two sides formed. Each cone is rolled and formed using a CNC hydraulic bending machine. The drum adopts a lap joint structure design and the guiding effect of the lap joint effectively ensures the co-axiality and circularity of the drum. The design of the lap-welded structures has higher strength, stiffness, and stronger shear resistance compared to butt-welded structures. The key parts are all welded using the submerged arc automatic welding method, ensuring the welding quality.
STEP
03
Painting
The drum and all steel structural components are shot blasted through a type shot blasting machine (16 sets of heads, 360 degrees), fully improving the adhesion of the paint on the surface of the workpiece. Spray painting adopts a continuous assembly line (60 meters long) for operation, dust-free throughout the entire process and adopts a baking process for treatment. The paint quality and rust prevention performance are industry-leading level. We are the only enterprise in the industry that adopts shot blasting and paint penetration assembly line operations.
STEP
04
Final Assembly
A reasonable layout on an assembly line with the process and strict quality control system provides guarantees for high-quality production operations and production capacity. The hydraulic system is assembled in a specially designed sealing environment; which has strict procedures to ensure its cleanliness. That ensures stable quality and reliability when used! The oil filling is strictly measured using a CNC refuelling machine to avoid problems caused by excessive or insufficient refuelling.
STEP
05
Detection
After each mixer truck is installed and taken offline, it must undergo about 2 hours of debugging to ensure that the drum rotates smoothly and reaches the set speed, and to ensure that all hydraulic components are free of oil leakage. During debugging, we make sure the radiator fan can automatically turn on when the oil temperature reaches the set level. After mixer truck debugging is completed, there are strong inspections such as side slip, lighting, braking system and reflective markings that are tested item by item on the inspection line to ensure the trucks meet reliability and safety quality.
WHAT PEOPLE SAY
Testimonial
Here’s what our satisfied customers have to say about their experience and the exceptional performance of our concrete transit mixers.
“I didn’t expect that the mixers from Yongda in China and those in Australia have almost the same structure and functionality, with comparable performance. However, they are much more affordable. It’s a great value for the money.”
Phil Henham
– From New Zealand
WHY WE ARE THE BEST
We work with you to make your vision a reality
Finance Aeascover A Moving Experience Like No Other At OutgridWe Going Beyond Merely.Finance Aeascover A Moving Experi
“Lorem ipsum dolor sit amet, consectetur adipiscing elit, Lorem ipsum dolor sit amet Lorem ipsum dolor sit amet Lorem ipsum dolor sit amet, consectetur adipiscing elit, Lorem ipsum dolor sit amet Lorem ipsum dolor sit amet”
Alva Edision
– From Australia
RECOMMEND PRODUCTS
